Most commercial buildings in Davis are not wasting money because they lack solar panels or new equipment. They are wasting it through schedules, settings, and small leaks that nobody has looked at in a while.
Key Takeaways
- ✓ Start with 12 to 24 months of utility data so you can see what normal looks like for the building.
- ✓ HVAC schedules, setpoints, and lighting controls are often the fastest, cheapest energy savings.
- ✓ Davis’s AquaHawk portal lets owners see hourly water use and set leak alerts at no cost.
- ✓ Summer irrigation drives much of Davis’s water demand, so seasonal schedule changes matter.
- ✓ Preventative maintenance keeps equipment running close to its intended efficiency.
- ✓ Capture what you learn so the next capital decision is based on data, not guesswork.
Why Operational Savings Come First
When owners hear “sustainability,” they often picture a large capital project. Those projects have their place, and some pay back well. But they also take time, budget, and planning. Operational improvements are different. They change how the building runs, not what it is made of, and they can often start saving the month they are made.
Davis gives owners good reasons to start here. The City’s 2020-2040 Climate Action and Adaptation Plan sets a goal of carbon neutrality by 2040. Electricity generation comes from Valley Clean Energy, with PG&E delivering it and sending the bill. Water comes mostly from the Sacramento River, with City wells filling in during warm months and drought. Using less of both is good for the budget and consistent with where the community is heading. For the bigger picture, see our guide to sustainable commercial property management in Davis.
Before you replace it, measure it.
1. Benchmark Before You Change Anything
You cannot tell whether a change worked without a baseline. Pull 12 to 24 months of PG&E bills and City of Davis water bills and line them up by month. Look for use that climbs without an explanation, months that do not fit the seasonal pattern, and costs that keep rising in one category.
ENERGY STAR Portfolio Manager is a free tool for tracking building energy use over time and comparing it with similar buildings. If your commercial building has more than 50,000 square feet of gross floor area, California’s Building Energy Benchmarking Program already requires you to report through it each year by June 1. Smaller buildings are not required to report, but the same habit is just as useful.
Changes in use may have good explanations: a new tenant, longer hours, or a hot summer. The point is to ask why, and to have numbers to compare against after you make improvements.
2. Match HVAC Schedules to How the Building Is Used
Heating and cooling are usually the largest energy loads in a commercial building, and Davis summers make cooling especially important. Yet many buildings run schedules that were set years ago for tenants who have since moved, changed hours, or shifted to hybrid work.
- Compare the building automation or thermostat schedule with actual occupancy, including weekends and holidays.
- Check that heating and cooling setpoints have a reasonable dead band so systems are not fighting each other.
- Look for overrides that were turned on for one event and never turned off.
- Confirm economizers are working, so the building can use cool outside air when it is available.
- Ask tenants about comfort complaints. Hot and cold spots often point to a controls or maintenance problem, not a need for new equipment.
These checks cost staff or technician time, not equipment, and they often improve comfort at the same time they reduce energy use.
3. Tighten Up Lighting and Plug Loads
Exterior lighting on the wrong timer, parking lot lights burning during the day, and disabled occupancy sensors are some of the easiest waste to find. Walk the property at night and early in the morning. Check that photocells and timers are set correctly, and that common-area and back-of-house lighting is not running around the clock.
Inside, look at plug loads in common areas: water heaters for break rooms, vending machines, and equipment that stays on overnight. Small loads that run 24 hours a day add up over a year. If you do plan a lighting retrofit later, remember that California’s Title 24 energy code may set lighting and controls requirements for the work, so it is worth scoping properly rather than replacing fixtures one at a time.
4. Put the City’s Water Data to Work
Davis property owners have a tool many cities do not offer: AquaHawk, the City’s water use portal. It shows hourly use, projects charges for the current billing period, and lets account holders set their own alerts. The City recommends a continuous-use alert over 24 hours, because water that never stops flowing overnight often means a leak.
A few practical steps:
- Register every meter on the property and group them under one login.
- Set a continuous-use alert and daily or weekly thresholds that fit normal use.
- Give access to the landscape contractor and, where it makes sense, to tenants.
- Decide in advance who investigates when an alert fires, and how quickly.
Alerts are opt-in, and the City is clear that customers are responsible for all water use on their property. A few minutes of setup can prevent weeks of paying for water that is running into the ground.
5. Reprogram Irrigation for the Season
The City notes that summer water use across the greater Sacramento area typically runs about 60% higher than winter use, mostly because of irrigation. On many commercial sites, landscaping is the largest water user, and irrigation runs when no one is around to notice a problem.
- Adjust watering schedules at least seasonally, and pause them after rain.
- Use cycle-and-soak programming so water soaks in rather than running off.
- Walk zones while they run to catch broken heads, misdirected spray, and stuck valves.
- Ask your landscaper about high-efficiency nozzles and flow sensing as part of routine replacements.
The City’s own Parks Division uses many of these practices on public landscapes, including cycle-and-soak programming, high-efficiency rotors, flow sensing, and water audits. They are proven, low-cost steps, not experiments.
6. Treat Preventative Maintenance as an Efficiency Program
Dirty condenser coils, clogged filters, worn belts, failing dampers, and refrigerant problems all make equipment work harder for the same result. A leaking fixture or a running toilet in a tenant restroom wastes water every hour of every day. Regular preventative maintenance keeps systems closer to their intended efficiency and extends equipment life.
Maintenance also tells you something. Equipment that needs more frequent repairs, uses more energy each year, or keeps generating comfort complaints may be approaching the point where replacement makes more sense than another repair. Our article on repair or replace decisions walks through that choice, and how preventative maintenance protects property value explains why it matters beyond utility bills.
7. Use What You Learn for the Next Capital Decision
Operational improvements are not the end of the story. They clear away the waste, so the data that remains shows what the building actually needs. When a rooftop unit, water heater, or lighting system does reach the end of its life, you will be choosing a replacement based on real performance, not guesses.
That is also the moment to look at incentives. PG&E lists business efficiency rebates, small and medium business programs, demand response, and zero-interest financing for qualifying equipment, and Valley Clean Energy has its own commercial offerings. Programs change, so confirm current terms before counting on them. Our article on the hidden ROI of energy and water efficiency explains how small recurring savings add up over a hold period, and where commercial properties waste money offers more places to look.
Where These Steps Fit in Davis Property Management
None of these steps requires a major project, but each one requires someone to own it. That is where hands-on property management makes the difference: reviewing bills each month, walking the site, coordinating vendors, and following up when the data looks wrong. This month’s other Davis articles cover property management in a university-driven market and EV charging demand at Davis properties, both of which connect to the same utility and capital planning decisions.
Frequently Asked Questions
What is the fastest way to lower energy costs at a Davis commercial building?
For many buildings, it is matching HVAC and lighting schedules to actual occupancy. Equipment that runs on nights, weekends, or holidays when the building is mostly empty is one of the most common and least expensive problems to fix.
How do I check for water leaks at my Davis property?
Register each meter on AquaHawk, the City of Davis water use portal, and set alerts. The City recommends a continuous-use alert over 24 hours, since water that keeps flowing overnight often indicates a leak. Pair that with regular walk-throughs of irrigation zones and restrooms.
Does my building have to report its energy use?
Under California’s Building Energy Benchmarking Program, commercial buildings with more than 50,000 square feet of gross floor area and no residential utility accounts must report energy use annually by June 1. Smaller buildings are not required to report, but tracking use is still worthwhile.
Are there rebates for energy efficiency in Davis?
Davis is in PG&E’s service territory, and PG&E lists business efficiency rebates, small and medium business programs, demand response, and financing for qualifying equipment. Valley Clean Energy also offers commercial programs. Amounts and eligibility change, so confirm current terms with each program.
When should I stop making operational fixes and plan a capital project?
When equipment needs frequent repairs, uses more energy each year despite good maintenance, or cannot keep tenants comfortable, it may be time to plan replacement. Timing that replacement before a failure gives you more options and better pricing.
Related Reading
- → Sustainable Commercial Property Management in Davis
- → Sustainable Commercial Property Management in Sacramento
- → Commercial Property Management in Davis: Serving a University-Driven Market
- → EV Charging Demand at Davis Commercial Properties: Tenants, Visitors, and Fleets
- → East Bay Commercial Property Management: How Owners Compare Local Managers
- → Energy and Water Efficiency: The Hidden ROI in Sacramento Commercial Properties
- → How Sustainable Commercial Property Management Can Improve ROI in Sacramento
Next Step
Want to see where your Davis property is using more water and energy than it needs to? Download the complimentary Sustainable Property ROI Audit Kit, or contact Clear Blue Commercial to talk through your property with Carolyn at carolyn@clearbluecommercial.com.

